Showing 1–12 of 127 results

EN 14122-4 Hymer Fixed Vertical Ladders For Safe Access to Machinery

Flexible, easy-to-install and manufactured to EN 14122-44, our modular fixed ladder system offers an unrivalled number of design options. So no matter what obstacles you face, we have the ladder solution for you.

In a hurry? The modular system means parts are quick to ship out and easy to assemble on site.

Below is a list of standard sizes kept in stock. If you require a custom solution, contact our project team for further information.

End Cap For Hymer Fixed Vertical Ladders

Ribbed plug / end cap for aluminium ladder sections 60x25mm stile dimensions

Gmax Podium Step With Rear Safety Gate

Gmax Platform with overhead type rear barrier.
Work platform designed for all work up to 3.68 m height. Ideal for finishing work such as carpentry, dry lining and general maintenance. Safe, enclosed working with generous 410x436mm platform area. Lightweight and easier to manoeuvre. No fatigue when transporting/moving around site. Conforms to EN131-7

Gmax+ Plus Podium Step With Saloon Door Safety Gate

The Gmax+ Platform with “saloon”-type automatic closing door.
Work platform designed for all work up to 3.44 m height. Ideal for finishing work such as carpentry, dry lining and general maintenance. Safe, enclosed working with generous 410x436mm platform area. Lightweight and easier to manoeuvre. No fatigue when transporting/moving around site. Conforms to EN131-7

Hymer 2211 / 2210 Stairway Only

  • Step width optionally 600, 800 or 1,000 mm.
  • For access ways to machines or machinery systems, a step width of 600 mm is only permitted in exceptional cases.
  •  Aluminium profile steps 250 mm deep, alternatively aluminium or steel grating steps 240 mm deep at additional cost.
  • As standard with one handrail, mounted on the left, second handrail available at extra cost.
  •  For access paths to machines or machinery systems, handrails on both sides are mandatory if the distanceto the object is larger than 120 mm.
  •  Standard design with 2 wall mounting brackets at top and floor brackets at bottom, on request at top with suspension hook or bearing bracket at additional cost
  •  Intermediate sizes at price of next highest number of steps.
  •  Permissible load of step 150 kg, permissible load total 150 kg/m² (max. 300 kg).
  • For use only by one person.
  •  Not available on stock, production on order, therefore, no exchange possible.
  •  Shipped in subassemblies pre-assembled in the factory.

Hymer 2221 / 2220 Stairway with platform

  • Step width optionally 600, 800 or 1,000 mm.
  • For access ways to machines or machinery systems, a step width of 600 mm is only permitted in exceptional cases.
  •  Aluminium profile steps 200 mm deep, alternatively aluminium or steel grating steps 240 mm deep at additional cost.
  • As standard with one handrail, mounted on the left, second handrail available at extra cost.
  •  For access paths to machines or machinery systems, handrails on both sides are mandatory if the distance to the object is larger than 120 mm.
  •  1,100 mm high guardrail on the platform, with knee and foot rail.
  •  Platform length 500 mm, extension in steps of 500 mm for aluminium profile steps and grating platforms. Where aluminium chequer plate is used intermediate sizes are possible. Platform lengths are limited to 2,500 mm in cantilever version.
  • Standard design with 2 wall mounting brackets at top and floor brackets at bottom, on request at top with suspension hook or bearing bracket at additional cost.
  •  Triangular brackets must be used for side wall mounting , platform exit optionally on the left or on the right.
  •  Intermediate sizes at price of next highest number of steps.
  •  Permissible load of step 150 kg, permissible load total 150 kg/m² (max. 300 kg).
  • For use only by one person.
  • Not available on stock, production on order, therefore, no exchange possible.
  •  Shipped in subassemblies pre-assembled in the factory.

Hymer 2231 / 2230 Mobile Access Platform

  • Step width optionally 600, 800 or 1,000 mm.
  • Aluminium profile steps 200 mm deep, alternatively aluminium or steel grating steps 240 mm deep at additional cost.
  • Handrails on both sides as a standard.
  • 1,100 mm high guardrail on platform with knee and foot rail.
  •  Platform length 500 mm. Extension for aluminium profile steps and grating platforms in steps of 500 mm. Where aluminium chequer plate is used intermediate sizes are possible.
  •  Front or side exit on request.
  •  Chassis on step section = Ø 125 mm diameter castors with brakes, chassis on support section = mobile cross-beam with Ø 160 mm fixed castor.
  •  Low play castor bearings, therefore extremely stable.
  •  Permissible load total 150 kg.
  •  For use only by one person.
  •  Not available on stock, production on order, therefore, no exchange possible.
  •  Shipped in subassemblies pre-assembled in the factory.

Hymer 2241 / 2240 Bridging Unit / Step Over Unit

  • Step width optionally 600, 800 or 1,000 mm.
  • For access ways to machines or machinery systems, a step width of 600 mm is only permitted in exceptional cases.
  •  Aluminium profile steps 250 mm deep, alternatively aluminium or steel grating steps 240 mm deep at additional cost.
  •  As standard with one handrail, mounted on the left, second handrail available at extra cost.
  •  For access paths to machines or machinery systems, handrails on both sides are mandatory if the distance to the object is larger than 120 mm.
  •  1,100 mm high guardrail on the platform, with knee and foot rail.
  •  Platform length 500 mm. Extension for aluminium profile steps and grating platforms in steps of 500 mm. Where aluminium chequer plate is used intermediate sizes are possible.
  •  Platform lengths restricted in cantilever version.
  •  Standard design with floor bracket at bottom, mandatory bolting to the floor.
  •  Intermediate sizes at price of next highest number of steps.
  •  Permissible load of step 150 kg, permissible load total 150 kg/m² (max. 300 kg).
  • For use only by one person.
  • Not available on stock, production on order, therefore, no exchange possible.
  • Shipped in subassemblies pre-assembled in the factory.

Hymer 2271 Modular/Linking Industrial Steps

  • Ideal for plant and machine operation and maintenance work.
  • Single modules combinable with different constructions.
  • The parallel design allows the step to be fully extended against machines and walls.
  • Sold side walls for extreme stability and long life.
  •  Screw connections permit simple low-cost replacement of components.
  • Aluminium profiled step with step depth 250 mm, alternative steel or aluminium grating steps with step depth 240 mm.
  •  Vertical step distance 200 mm.
  • Comfortable top step with  470 mm step depth and back-yellow marking of front step edge.
  • With castors to relocate the step easily.
  •  Floor mounting at existing angle.
  •  Shipped fully pre-assembled at the factory.
  • Permissible load 150 kg (1.5 kN).
  •  Not available on stock. Production on order, therefore, no exchange possible.

Hymer 2272 Safety Cage brace

3.19m length strap for bracing the safety cage hoops. 5 required to complete a cage system

Hymer 2280 Tanker Ladder For Maintenance And Inspection

Safely and conveniently inspect and maintain tankers and tank trailers with our mobile, height adjustable Hymer 2280 tanker ladder.

The tried and tested design includes a wide stabiliser bar to the front, dual handrails for safe access, and an extra wide platform at the top. Design options include a circular, rectangular or extra wide safety cage.

Hymer 4011 Single Ladder

Features include: 30mm deep rungs Square rung Ladder internal width 300 Durable stiles of high quality extruded profile Stabiliser bar